Blog

Slow Draining Toilets: Causes and Fixes!

Slow draining toilets can be a frustrating issue for homeowners. It’s not only unpleasant to use a toilet that doesn’t flush properly, but it can also lead to more serious plumbing problems if left unaddressed.

One of the primary causes of slow draining toilets is a clog in the toilet pipes. The toilet trap is a U-shaped bend at the bottom of the toilet that helps to prevent sewer gases from entering your home. Over time, debris such as toilet paper, hair, and soap scum can accumulate in the trap, leading to a slow drain. Another common cause of slow draining toilets is a clogged drain vent.

The drain vent is a pipe that runs from your toilet to the roof of your home and helps to regulate air pressure in the plumbing system. If the vent is clogged, it can cause water to drain slowly from your toilet.

Fortunately, there are several ways to fix a slow draining toilet. Depending on the cause of the issue, you may be able to clear the clog using a plunger or a plumbing snake.

In some cases, you may need to remove the toilet to access the trap and remove the clog manually. If the issue is related to a clogged drain vent, you may need to climb onto your roof to clear the obstruction.





    We will store the information you provide in this form in accordance with our privacy policy Here

    Common Causes of Slow Draining Toilets

    When it comes to slow draining toilets, there are several common causes that can lead to this frustrating problem. In this section, we will explore the three most common causes of slow draining toilets and what you can do to fix them.

    Blocked Waste Pipes

    One of the most common causes of slow draining toilets is a blocked waste pipe. This can be caused by a variety of things, including flushing non-degradable items down the toilet, such as wipes, sanitary products, or excessive amounts of toilet paper. Over time, these items can build up and cause a blockage in the waste pipe, leading to slow draining toilets.

    To fix this issue, you can try using a plunger to dislodge the blockage. If this doesn’t work, you may need to use a drain snake or call a professional plumber to remove the blockage.

    Vent Stack Obstructions

    Another common cause of slow draining toilets is obstructions in the vent stack. The vent stack is a pipe that runs from the roof of your home and allows air to flow through the plumbing system, preventing a vacuum from forming. If the vent stack becomes blocked or obstructed, it can cause slow draining toilets.

    To fix this issue, you can try using a plumbing snake to clear the vent stack. If this doesn’t work, you may need to call a professional plumber to remove the obstruction.

     

    Insufficient Water Level

    Finally, an insufficient water level in the toilet tank can also cause slow draining toilets. If the water level in the tank is too low, it can result in a weak flush, which can lead to slow draining toilets.

    To fix this issue, you can adjust the water level in the tank by adjusting the float. If you’re not sure how to do this, you can consult the manufacturer’s instructions or call a professional plumber to help.

    By understanding the common causes of slow draining toilets, you can take steps to prevent this frustrating problem from occurring in your home.

    Diagnostic Methods

    When faced with a slow draining toilet, there are several diagnostic methods that can be used to identify the cause of the problem. In this section, we will discuss three common diagnostic methods: visual inspection, plunger test, and drain camera survey.

    Visual Inspection

    The first step in diagnosing a slow draining toilet is to perform a visual inspection. This involves checking the toilet bowl and the surrounding area for any visible signs of blockages or damage. Look for any foreign objects that may have been flushed down the toilet, such as toys, sanitary products, or excessive toilet paper. Check for any cracks or damage to the toilet bowl or the pipes leading to and from the toilet. A visual inspection can often identify the cause of the problem, allowing for a quick and easy fix.

    Plunger Test

    If a visual inspection does not reveal the cause of the slow draining toilet, the next step is to perform a plunger test. This involves using a plunger to create suction and force any blockages through the pipes. To perform a plunger test, place the plunger over the toilet drain and push down firmly, then pull up quickly to create suction. Repeat this process several times until the blockage is cleared. If the plunger test is successful, the toilet should drain normally.

    CCTV Drain Survey

    A CCTV drain survey may be necessary if a visual inspection and plunger test do not solve the problem. This involves using a small camera attached to a flexible cable to inspect the pipes leading to and from the toilet. The camera can identify any blockages or damage that may be causing the slow draining toilet. Once the problem has been identified, it can be fixed using the appropriate method.

    In conclusion, there are several diagnostic methods that can be used to identify the cause of a slow draining toilet. A visual inspection, plunger test, and drain camera survey can all be effective in identifying blockages or damage that may be causing the problem. By using these methods, we can quickly and easily fix a slow draining toilet, ensuring that it functions properly and efficiently.

     

    Solutions and Fixes

    When it comes to fixing a slow draining toilet, there are several solutions and fixes that you can try. In this section, we will discuss the most effective methods for fixing a slow draining toilet.

    Plunging Techniques

    One of the most common and effective ways to fix a slow draining toilet is by using a plunger. A plunger works by creating a vacuum that dislodges any blockages in the toilet pipes. To use a plunger, you should:

    1. Fill the toilet bowl with enough water to cover the plunger’s rubber cup.
    2. Place the plunger over the toilet’s drain hole and push down gently.
    3. Pull up on the plunger to create a vacuum and then push down again.
    4. Repeat this process several times until the water starts to drain normally.

    Chemical Drain Cleaners

    Another solution for fixing a slow draining toilet is to use a chemical drain cleaner. These cleaners work by dissolving any blockages in the pipes. However, it’s important to note that some chemical drain cleaners can damage your pipes, so it’s essential to use them carefully. Here are the steps to follow when using a chemical drain cleaner:

    1. Purchase a chemical drain cleaner that’s safe for your pipes.
    2. Pour the recommended amount of the cleaner into the toilet bowl.
    3. Wait for the recommended amount of time before flushing the toilet.

    Pipe Snaking

    If plunging and chemical drain cleaners don’t work, you may need to use a plumbing tool called a snake. A snake is a long, flexible wire that can be inserted into the toilet’s pipes to dislodge any blockages. Here’s how to use a snake:

    1. Insert the snake into the toilet’s drain hole.
    2. Turn the handle on the snake to move it through the pipes.
    3. Keep turning the handle until you feel resistance.
    4. Push and pull the snake to dislodge the blockage.

    High-Pressure Water Jetting

    If none of the above methods work, you may need to use high-pressure water jetting. This is a professional method that involves using a high-pressure water hose to blast away any blockages in the pipes. This method is very effective, but it can be expensive. It’s best to use this method as a last resort.

    In conclusion, fixing a slow draining toilet can be a frustrating experience, but with the right tools and techniques, it’s a problem that can be solved. By using the methods outlined in this section, you can fix your slow draining toilet quickly and easily.

    Preventive Maintenance

    To prevent slow draining toilets, we recommend regular preventive maintenance. This includes:

    Regular Cleaning

    Regular cleaning of the toilet bowl and drain can help prevent clogs and slow draining. We recommend using a toilet bowl cleaner and brush to clean the bowl at least once a week. Additionally, you can use a drain cleaner to clear any buildup in the drain.

    Proper Usage

    Proper usage of the toilet can also help prevent slow draining. We recommend only flushing toilet paper and human waste down the toilet. Avoid flushing anything else, such as feminine hygiene products, wipes, or paper towels, as these can cause clogs and slow draining.

    Routine Inspection

    Routine inspection of the toilet and plumbing system can help identify any potential issues before they become major problems. We recommend inspecting the toilet and plumbing system at least once a year. Look for any signs of leaks, cracks, or corrosion in the pipes, and check the toilet for any signs of wear and tear.

    By following these preventive maintenance tips, you can help prevent slow draining toilets and ensure your plumbing system is in good working order.

     

    When to Call a Professional

    At times, slow draining toilets can be fixed with simple DIY solutions. However, there are instances where calling a professional becomes necessary. As a professional plumbing company, we recommend calling us at Jonny’s Drains when you experience any of the following:

    • Frequent Clogs: If you notice that your toilet is clogging more often than usual, it could be an indication of a more significant issue that requires professional attention. Our expert plumbers have the necessary tools and experience to diagnose and fix the problem effectively.

    • Sewer Line Issues: Slow draining toilets can be a sign of sewer line issues. A damaged or collapsed sewer line can impede the proper flow of waste, resulting in slow drainage and flushing issues throughout the plumbing system. Our team has the expertise to diagnose and fix sewer line problems.

    • Older Homes: If you live in an older home, your plumbing system may be outdated or damaged. Our team has experience working with older plumbing systems and can provide effective solutions to fix slow draining toilets.

    It is essential to call a professional when you experience any of the above issues to prevent further damage to your plumbing system.

    At Jonny’s Drains, we are committed to providing our clients with reliable and efficient plumbing services.

    Contact us today for all your plumbing needs.

    Request A Call Back Today

    Let us call you when it's convenient for you. Request a callback and we will contact you as soon as possible to see what we can do for you.

    Need a drain unblocking? No problem!

    Many of my customers in Westerham, Kent report of blocked drains, be it toilet and sink blockages, blocked waste pipes or manholes. If you discover a blockage, don’t delay. I offer a 24 hour, 7 days a week service and can often unblock your drain within an hour. So if you have emergency drainage issues, contact Jonnys Drains straight away on 01959 928 853.

    Highly Experienced

    Free Callout

    Local Service

    }

    24/7 SERVICE